DRAKE ESR-D103 Manual de instrucciones descargar pdf (Pagina 10)

and whether the lock light lights up simultaneously.

Light the sixth strip; press the +/- key to switch the status

between “on” and “off”, press the OK key to enter the

motor interface when the “on” status is chosen and the

interface shows as

Light the seventh instruction strip; press the OK key to

spring out a inquire window with a sentence “ARE YOU

SURE?” Use pressing the red key to confirm and the

green one to give up

Light the fourth instruction strip to press the +/- key to

choose one of the three instructions: Off, West, and East.

Press the OK key to confirm. Therein:

1. West: to limit the westward limit of the dish-adjustment

2. East: to limit the eastward limit of the dish-adjustment

3. Off: to give up the limit set

Light the Position auto, Move dish, Step Move; the functions

of these three instructions are to adjust the direction and angle

of dish, hereinto:

1. Position auto: the drive instruction will not be stopped

until to press the OK key

2. Move dish: to drive the dish to adjust a relative biggish

range

3. Step Move instruction is to modify a relative minor range.

What we according to of adjustment is the Quality strip show

its longest length, in which:

=>E: to drive the dish to the east direction

=>W: to drive the dish to the west direction

=>Stop: to stop the adjustment

After adjustment：

1. Light the fifth instruction strip Store position, force down

the number keys to input the adjusted situation (position)

code and then press the OK key to save the code

2. Light the sixth instruction strip Goto position, use input

the code value to drive the dish to the situation where

has saved

The function of eighth instruction strip Recalculate position

is to send an instruction to the motor, and calculate the

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Sin comentarios

DRAKE ESR-D103 Manual de instrucciones Pagina 10