DRAKE ESR-D104 Guía de usuario descargar pdf (Pagina 12)

- 12 -

4. User Installation

This menu consists of 5 sub-menus as shown

below.

• Antenna Setup

• Channel Search

• System Setting

• Parental Lock

• Factory Default

4.1 Antenna Setup – 1) DiSEqC 1.2

1. Antenna : You can select a maximum of

16 antennas with the combination

switches.

2. Type : Select your antenna type to be

DiSEqC1.2

3. Satellite : Select first satellite you want.

4. LNB Type : Select your LNB type. If you

have universal LNB, select Univ.

5. LNB Freq. : Enter the proper LNB

frequency referring to your LNB using the

numeric keys on the RCU or use the KEY

PAD displayed by pressing OK key.

If you have a dual LNB, enter the proper value in the value box.

6. Switches (22KHz Tone, DiSEqC) : You

can select the switches with which you

want to configure the antenna.

7. C/Ku band control : You can select C/Ku

band control by selectiing the switch type.

4.1.1 East West Limit

On selecting Limit Setup button, the Limit

Setup menu will pop up. Pressing the E key

on the RCU continuously will take you to the

easternmost point. Press the OK key on the

RCU. The message “Would you like to set

East limit of DiSEqC motor?” will be displayed

for your confirmation. Place cursor on the OK

button on the screen and press OK key on

the RCU to confirm the East limit.

To set West limit, follow the same steps as

East limit.

4.1.2 Reset DiSEqC limit

If you want to reset the East limit or West limit,

place the cursor on Reset DiSEqC Limit

button and then press OK key on the RCU.

The message “Would you like to reset limit

for DiSEqC positioner?” will be displayed for

your confirmation. Select OK button by

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

Comentarios a estos manuales

Sin comentarios

DRAKE ESR-D104 Guía de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor DRAKE ESR-D104