
SPECIFICATIONS
Frequency Coverage
:
Accessory Coverage:
Modes of Operation:
SSB, CW, AM, RTTY.
Sensitivity: SSB Mode: 10
dB
signal-plus-noise to noise ratio obtained on 80
M-
10 M amateur bands with less than a 0.25 microvolt signal on the
antenna terminal, on other frequencies less than 0.5 microvolt signal.
Selectivity:
Covers 3.5to 4.0 MHz, 7.0to 7.5
MHz,14.0
to
14.5MHz,
21.0to
21.5 MHz,and 28.5 to 29.0
MHz.
15 accessory crystal sockets are provided. Coverage of any additional
500 kHz ranges between 1.5 and 30 MHz (except between 5.0 and
6.0 MHz) can be added by installing accessory crystals.
As supplied:
SSB
Mode:2.4kHzat
6
dB,
4.2kHz
at60dB.
AM
Mode:
8.0
kHzat
6
dB,28
kHzat
60dB.
With accessory crystal filters:
AM Mode, 2 filters available:
6.0 kHz at6
dB,
10 kHz at 60
dB.
4.0 kHz at6
dB,
7.5 kHz at 60
dB.
CW
1.5,
CW
.5,
CW
.255
Modes, 3 filters available:
1.5 kHz at6
dB,
3.0 kHz at 60
dB.
500 Hz at6
dB,
1000 Hz at 60
dB.
250 Hz at6
dB,
600 Hz at 60
dB.
Stability
:
After warm up, frequency will not drift more than
+-
100 Hz, includ-
ing voltage variation of
+-
10%.
Calibration:
Better than
+-
1 kHz when calibrated at nearest 100 kHz calibration
point.
Spurious Responses:
Internal spurious response less than the equivalent of a 1 microvolt
antenna signal on all amateur bands.
Image Rejection:
(11.29 MHz above desired): Over 70
dB
below 23 MHz, 60
dB
above
23 MHz.
Input Impedance:
52 Ohms nominal.
Audio Output Impedance:
3.2 Ohms to speaker, or headphones, 3000 Ohms anti
VOX.
Audio Output:
0.7 Watt at AVC threshold, 2 Watts maximum at less than 5% T.H.D.
AGC:
Audio Output increases 3
dB
maximum for a RF input increase of
100
dB
above AGC threshold. AGC threshold typically 1 microvolt.
Attack time: 1 millisecond
Release times: Slow: 1 second
Medium: 350 mSec
Fast: 50 mSec
Power Consumption:
Size:
Weight:
60 Watts, 120/240 Volts AC,
50/60
Hz.
5.5 inches high, 10.75 inches wide, 12.25 inches deep overall.
17 pounds.
1-3
Comentarios a estos manuales