DRAKE 4000 series II Guía de usuario Pagina 100

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 236
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 99
Panel User Guide Issue 1.4 4000 Digital Series II
Page 70 STA0380
4.5.7 Soft Pushbutton
Press the pushbutton to enable the Control Panel Soft Mode operation. The red LED is illuminated.
Another press will return the Control Panel to normal operation.
4.5.8 Auxiliary Volume Control
Turn the Auxiliary Volume Control clockwise to increase the auxiliary channel volume, or anti-clockwise
to decrease the volume. The auxiliary channel is not always used.
The current setting of either the Main or Auxiliary Volume Control is displayed as a level bar on the Reply
Key, above the Reply Key text. Turning these controls clockwise or counter-clockwise, increases or
decreases the length of the relevant control bar.
The most recently moved control is displayed. If the Auxiliary Volume level setting is displayed and the
Auxiliary Volume Control is static for 2 seconds, the display reverts to showing the Main Volume level
setting. (The auxiliary level bar is displayed as a broken line to distinguish it from the main level bar).
The level bars are graded in 0.5 steps from a minimum setting of 0.0 (off) to a maximum setting of 10.0
(approximately +12 dB). Each 0.5 step corresponds to 1 pixel of the level bar. The default setting for both
controls is 5.0 (approximately 0 dB).
Pressing and holding the auxiliary control pot switch shows the current level setting for each DAK. There
is no LED indication for this switch action.
4.5.9 Main Volume Control
Turn the Main Volume Control clockwise to increase the intercom volume, anti-clockwise to decrease
the volume.
The current setting of either the Main or Auxiliary Volume Control is displayed as a level bar on the Reply
Key, above the Reply Key text. Turning these controls clockwise or counter-clockwise, increases or
decreases the length of the relevant control bar.
The most recently moved control is displayed. If the Auxiliary Volume level setting is displayed and the
Auxiliary Volume Control is static for 2 seconds, the display reverts to showing the Main Volume level
setting. (The auxiliary level bar is displayed as a broken line to distinguish it from the main level bar).
Consult the Section “LCD Key Panel Soft Mode” for Soft Mode pro-
gramming description.
A panel fitted with a PDE4537 options card can have an external line
level auxiliary input.
Auxiliary level indicator
R E P L Y
Vista de pagina 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 235 236

Comentarios a estos manuales

Sin comentarios